Mustang Smoked Light Cover ('99-'04) - Installation Instructions

Headlight Covers Install:

1. Using the supplied alcohol prep pads, thoroughly clean surface of the light where adhesive from cover will mate with light.

2. Peel backing film from adhesive on light cover.

3. Place front lower lip of light cover under head light.

4. Place outer lip of light cover under outer edge of headlight ensuring a tight fit.

5. Firmly press down on adhesive to fully seat the light cover.

1. Using the supplied alcohol prep pads, thoroughly clean surface of the light where adhesive from cover will mate with light.

2. Peel backing from adhesive on light cover.

3. Carefully align cover over light. Make sure the light is fully covered on outer corner.

4. Firmly press down on the adhesive to fully seat the cover.

Installation instructions provided by Manufacturer.