Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

AEM Induction Brute Force Cold Air Intake; Polished (11-14 Mustang V6)Find parts that fit my vehicle

Item 389650
AmericanMuscle no longer carries the AEM Induction Brute Force Cold Air Intake; Polished (11-14 Mustang V6). Please check out 1979-1993 Fox Body Mustang Intake Parts for an updated selection.
AEM Induction Brute Force Cold Air Intake; Polished (11-14 Mustang V6)
Verify parts fit and get product recommendations.
Mustang Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Increases Throttle Response
    • Improves Horsepower and Torque
    • Reusable Dryflow Filter, No Messy Oils
    • CNC Mandrel-Bent Intake Pipe
    • Bright Mirror Polished Finish
    • Not CARB Certified, Thus Not Legal For Sale or Use in California
    • NO Computer Re-Tune Required
    • Lifetime Warranty
    • Fits 2011-2014 3.7L V6 Mustangs

    Description

    Boosts Horsepower. An AEM Brute Force Cold Air Intake improves the airflow into your S197 Mustang's engine for more power and better gas mileage all while filtering out harmful power robbing particles. This AEM CAI kit completely replaces your 3.7L V6 Mustang's restrictive factory air box, intake tube and paper filter element with a Dryflow filter assembly for impressive HP and TQ gains.

    No Tune Required. Unlike other Cold Air Intakes on the market for the 3.7L V6 Mustangs the AEM Brute Force CAI does not require a computer re-tune. The engineers at AEM designed, tuned, and dyno-tested this cold air intake to improve your Pony's power using the stock tune.

    Reusable Air Filter.AEM Dryflow air filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration, and performance. They are washable and re-usable and can be used for up to 100,000 miles before servicing (depending on driving conditions).

    Made in the USA.Manufactured in the USA from CNC mandrel-bent 6061 aluminum piping to assure smooth unrestricted airflow, this AEM cold air intake tube is completed in a bright mirror-polished finish for long lasting corrosion resistance and impressive good looks.

    Lifetime Warranty. AEM is so confident in their cold air intake system that it is covered by a Lifetime Limited Warranty.

    Easy Bolt-on Installation. AEM Cold Air Intake kits are designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

    Recommended Upgrade. Even though a re-tune is not required for operation, AmericanMuscle recommends a Bama custom tune with a MustangHandheld Tuner to reprogram the vehicles computer (ECU) to get the best performance possible out of this cold air intake.

    Application. This AEM Polished Brute Force Cold Air Intake System is specifically designed to fit the 2011 to 2014 Mustangs equipped with the 3.7L V6 Ti-VCT engine and does not require re-tuning the vehicles computer for operation.

    Technical Note. This AEM Cold Air Intake is not legal for use in California or other states adopting California emission standards.

    Note: Coupon codes cannot be applied to this product.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • 2 Grommet, PCV 3/4ID 1 3/8OD 2
    • 1 Bolt, Hex/flange M6-1.0 X 12
    • 4 Bolt, Button Head M6-1.0 X 10mm
    • 1 Edge Trim, 13”
    • 1 Airbox Lid; Ford Mustang
    • 1 Hose; 5/32”ID X 12”L
    • 1 Elbow,plastic 5/32” 90 Degree
    • 1 Grommet; 1.05” OD, .5”ID, .1875” Groove
    • 1I Filter Minder, 10”
    • 1 Air Box; Ford Mustang
    • 1 Element Parts Kit
    • 2 Washer; 1”D X 1/4 Hole Fender
    • 1 Nut, M6 Hex Serrated
    • 2 Bndhose Clamp, 3.15”-4.00”
    • 4 Washer, #12 Nylon 6/6
    • 2 Bolt, Socket M4-.7 X 8mm
    • 1 Tube; Ford Mustang
    • 1 Mount,rubber 5/8” X 6mm
    • 1 Plug, Plastic 5/8” X 5/16”
    • 1 Hose, Adapter 3.00/3.50x3 Blk
    • 1 1/2” Bndhose Clamp, 2.56”-3.50”
    • 1 Hose Clamp #6 Mini
    • 1 Vacuum Cap, 3/8”

    Tech Specs

    Cold Air Intake Specifications
    Year/Model:2011-2014 V6Filter Placement:Engine Bay
    Material:6061 AluminiumFinish:Polished
    Manufacturer:AEMComputer Tune Required:No
    4.6

    Customer Reviews (138)

      Questions & Answers

      10 More Questions

          Related Mustang Categories