Baer EradiSpeed+ 2-Piece Performance Drilled and Slotted Rotors; Front Pair (05-10 Mustang GT; 11-14 Mustang V6)Find parts that fit my vehicle

Braking Mastery with New Mustang Rotors. Made to amp up the torque and leverage of the brakes, as well as creating more stopping power and better cooling, the Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors, Front Pair are a big performance improvement over your 2005-2010 GT or 2011-2014 V6 Mustang’s stock brakes. The vented design cools the rotors fast even during repeated hard braking, preventing fade when you’re putting your bronc through its paces. The drilled and slotted surface improves bite and friction in all conditions, even the wettest.

Precision-Built Parts. The Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors use a sophisticated 2-piece construction to achieve their results. The core of each rotor is a 6061-T6 aerospace grade aluminum hat, finished in black anodizing. Tough stainless steel bolts – NAS, or National Aerospace Standard, grade hardware – secure this firmly to the rotor ring, which is made from cast steel and finished in rust-proofing zinc. The rotor is mill-balanced to eliminate excess vibration and noise for quiet, smooth operation.

Well-Designed for Strong Braking Action. Keeping temperatures below the “kneepoint” where gases form on the rotor surface or the brake fluids boil, the Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors is made with a carefully engineered venting system. The curved, directional vanes whirl air in through the central hole in the hat, so that it flows over the vanes and rotor interior, cooling the metal and venting heat at the edges. The drilling and slotting refreshes the pads while keeping the rotor surface free of water, debris, and dust, for strong bite and a mating friction surface between pad and rotor. Besides these brake power boosts, the rotors also look brilliant and cleanly detailed inside your Mustang’s wheels for a refreshing new aesthetic.

Quick, Clean, Effective Installation. The Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors doesn’t require that you bleed the brake lines in preparation for installing it. The component bolts on easily in place of the stock rotors. Caliper relocation brackets and hardware are also included, allowing easy relocation of the calipers.

Kit Consists of Front Pair plus Brackets. The Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors set is made up of (2) 14” cross-drilled and slotted front rotors, (2) caliper relocation brackets, and all required installation hardware.

90 Day Warranty. The Baer EradiSpeed+1 2-Piece Drilled and Slotted Rotors is covered by a 90-day warranty from the manufacturer.

Application. These 2-piece Baer EradiSpeed+1 Front Slotted Brake Rotors are specifically designed for use on 2005-2010 GT and 2011-2014 V6 Mustangs. Not compatible with Brembo equipped models.

Fitment:

• 2005 Ford Mustang
• 2006 Ford Mustang
• 2007 Ford Mustang
• 2008 Ford Mustang
• 2009 Ford Mustang
• 2010 Ford Mustang
• 2011 Ford Mustang
• 2012 Ford Mustang
• 2013 Ford Mustang
• 2014 Ford Mustang

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov