How to Install BMR Adjustable Rear Sway Bar End Links (15-20 All) on your Ford Mustang

Installation Instructions:

• Start by safely jacking up the rear of the vehicle
  
• Remove the two rear wheels
  
• Remove the rear sway bar links by loosening the 17mm nuts (you will need to use the 6 mm hex head to hold the stud still)
  

• Now that you removed the old links start by installing the new BMR link (from the back side just like the one removed)
  

• Install the provided washer and nut 
  

• Tighten the nut down using an 18mm wrench or socket on the nut and a 17mm wrench on the notched backside of the link
  
• Adjust sway bar link to the desired length
  
• Repeat process on another side
  
• Re-install rear wheels and enjoy
  

Installation Instructions Written by AmericanMuscle Customer Bradley Davidson 8/14/2019