How To Install a Clutch/Brake Pedal cover - Manual - for your 1979-1993 Mustang

If you have an existing pedal cover you are changing follow the removal procedure “step 1” If not skip to the installation procedure 

Step 1: Remove the old cover from the pedal by either cutting or pulling it off, the old cover wont be needed so damaging it wont matter. 

Step 1: Make sure the new pedal cover is oriented the correct way. 

Step 2: On the back of the new pedal cover you will see an overlay flap on each side, these flaps hug around the pedal. Start by getting one side of the cover onto the pedal. 

Step 3: After one side is secure start folding the cover down across the pedal making sure the flap is tucking around the pedal. 

Step 4: Finish securing the cover by pressing down on the last corner and making sure all flaps are tucked around the pedal. 

Step 5: Enjoy your new pedal cover 

These instruction can be referenced for both the clutch and brake pedal covers if you have a manual transmission. 

Installation Instructions written by AmericanMuscle Customer Vance Clarke 9.22.2014 ​