Supercharged Power. Ideal for street rods, resto mods or as a replacement for a seized engine, this Edelbrock supercharged 5.0L Ford Coyote crate engine will produce 785 hp and 660 ft-lbs. of torque (running 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Creating the extra power is an Edelbrock supercharger with Eaton TVS R2650 rotors.
What's Included. This Kit includes a 5.0L Coyote crate engine, an Edelbrock supercharger and essential supercharger components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. This Kit also includes the wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAF sensor, OBD-II diagnostic port and fuse box.
Required For Installation. This Supercharged 5.0L Coyote Crate Engine will require an EFI compatible fuel delivery system with a minimum flow of 90 gph at 70 PSI. Fuel pressure regulator with boost reference is required.
Installation Notes. Edelbrock Break-In Oil is supplied. Before starting the engine, you will need to prime the oil system. Do
not turn the engine over with starter motor for priming.
Application. This Edelbrock Supercharged 5.0L Coyote Crate Engine with Tuner is ideal for street rods, resto mods or as a replacement for a seized engine.
Please Note. This Edelbrock Supercharged 5.0L Coyote Crate Engine is built to order.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov