Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
AmericanMuscle supplies new gasket with pushpins. Do not reuse old pushpins.
Open door.
(2) pushpins are located on each end of gasket. Remove and discard.
Gently separate front and rear molding from lower doorframe.
4. Remove old gasket by pinching gasket together and pulling away from vehicle.
1. Align new gasket with corner pushpin.
2. Press new gasket into channel and inside interior roof molding.
4. Replace front and rear door molding.
5. Exercise window, ensuring alignment.
Installation Instructions written by AmericanMuscle customer Mark Ockuly 11/11/15 ​