Holley Electric Fuel Pump Repair Kit; FUEL PRESSURE SAFETY SWITCH

Prevent Engine Failure. If your Ford Mustang experiences oil pressure loss, you have a limited amount of time before your engine will fail. Oil pressure is mandatory to operate an engine, and without it friction between mechanical parts will lead to an unusable engine. Protect your peace of mind with Holley’s Fuel Pressure Safety Switch. 

Monitor Oil Pressure. The Holley Fuel Pressure Safety Switch operates within 2 to 100 PSI working pressure range. When the switch senses that the oil pressure in your Mustang has dropped below 5 PSI, it will automatically shut off the electric fuel pump to protect your engine.

Moderate Installation. When installing this product, please disconnect the ground cable from your Mustang’s battery and use a minimum of 14-gauge wire. You will remove the OE oil pressure switch and add a ⅛” inch pipe nipple and tee (not included) in its place. Then, you will add the OE oil pressure switch and the Holley Fuel Pressure Safety Switch to this setup before wiring. Please refer to Holley Performance’s included instructions and wiring guide when installing this product to your Mustang for full details.

90-Day Limited Warranty. Holley stands behind its product by offering a Limited 90-Day Warranty. See manufacturer for full details. 

Application. The Holley Fuel Pressure Safety Switch is specifically designed for use on all model Ford Mustangs.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov