How To Install an Inner Seat Belt Sleeve - Gray - for your 1987-1993 Mustang

Step 1: Tilt and slide the seat forward so the seat belt sleeve is exposed 

Step 2: Using the t50 torx bit remove the bolt holding the sleeve to the floor pan. 

Step 3: Once removed put the bolt aside and pull the sleeve off the buckle release strap. 

Step 1: Take the new sleeve and slide the buckle release strap into it until the hole on the metal tab lines up with the hole on the sleeve. 

Step 2: Insert the bolt through the sleeve and thread into the hole on the floor pan using the t50 bit to tighten. 

Step 3: Slide your seat back into your preferred position and enjoy the new seat belt sleeve. 

Installation Instructions written by AmericanMuscle Customer Vance Clarke 9.22.2014 ​