J&L 3.0 Oil Separator; Black Anodized; Passenger Side (99-04 Mustang GT, Bullitt)Find parts that fit my vehicle

Reduces Engine Sludge. Stop engine sludge from hampering the power and performance of your 4.6L V8 Mustang. Installing a J&L Version 3.0 Air/Oil Separator will prevent crankcase exhaust, better known as blow-by (an oily vapor), from re-circulated back through your PCV system and intake. If left unchecked this oily vapor can solidify becoming engine sludge. This nasty sludge can coat the inside of your throttle body and intake manifold robbing you of power. A J&L 3.0 Separator is an ideal upgrade for all 1999-2004 GT Mustangs that want to reduce engine sludge in order to maintain power and performance.

Version 3.0. J&L improved on the designed of their old Oil Separator with the introduction of their new and improved Version 3.0. The first big change you will notice is that the Version 3.0 Separator has a larger 3 oz capacity, that is almost double that of their previous model. Another important difference is the filter media. Older J&L Separators used a Ford Motorcraft pre-filter, but now J&L uses a 1/2" thick 1/16th" aluminum honeycomb filter with a mesh stainless steel screen to trap even more fine oil vapors than before to prevent them from gumming up your engine.

Superior Quality. This J&L Oil Separator Company Air/Oil Separator is proudly manufactured right here in the USA. J&L CNC-machines their Air/Oil Separator from a solid block of billet aluminum for superior strength. Designed with a rubber o-ring, this Separator will maintain a tight leak-free seal. The base features a knurled texture, so that it can easily be gripped for removal during routine oil changes. J&L then completes their Catch Can in a durable black anodized finish for aggressive good looks and long lasting corrosion resistance.

Easy Installation. J&L Oil Separator Company engineered their Separator to be installed in under 10 minutes with just basic hand tools. This kit comes complete and includes two PCV lines with stock-style quick-disconnect fittings that allow for an easy plug-and-play installation. All the necessary parts are included, with no cutting or extra modifications required.

Application. This J&L Oil Separator Company Version 3.0 Black Passenger Side Air/Oil Separator is designed for use on 1999-2004 GT and 2001 Bullitt models. Installs on the passenger side, same side as the PCV valve.

Technical Note. This J&L Air/Oil Separator is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. It is intended for off-road use only.

Fitment:

• 1999 Ford Mustang
• 2000 Ford Mustang
• 2001 Ford Mustang
• 2002 Ford Mustang
• 2003 Ford Mustang
• 2004 Ford Mustang

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov