Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

K&N Series 63 AirCharger Cold Air Intake (07-09 Mustang GT)Find parts that fit my vehicle

Item 384122
AmericanMuscle no longer carries the K&N Series 63 AirCharger Cold Air Intake (07-09 Mustang GT). Please check out 1979-1993 Fox Body Mustang Intake Parts for an updated selection.
K&N Series 63 AirCharger Cold Air Intake (07-09 Mustang GT)
Verify parts fit and get product recommendations.
Mustang Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • More Torque and Horsepower
    • Series 63 Aircharger Kit
    • Free-Flowing High Density Polyethylene Intake Tube
    • Light Weight Plastic Heat Shield
    • Not CARB Certified, Thus Not Legal For Sale or Use in California
    • Oiled Air Filter Removes Harmful Contaminants
    • Filter is Washable and Reusable
    • NO Computer Tune Required
    • Simple Bolt-On Installation
    • Fits All 2007-2009 GT Mustangs

    Description

    Improves Horsepower And Torque. The K&N Series 63 AirCharger High Performance Cold Air Intake completely replaces your 4.6L powered GT Mustangs restrictive factory air box and paper filter element with a high flow K&N filter assembly and a free-flowing polyethylene intake tube for a noticeable increase in horsepower and acceleration all while still providing excellent filtration. Impressive gains of horsepower and torque have been seen at the rear wheels.

    No Tune Required. Unlike other Cold Air Intakes on the market for the 4.6L V8 Mustangs this K&N Series 63 CAI does not require a computer re-tune. The engineers at K&N really did their homework to improve your pony's power using the factory tune.

    Filters out harmful contaminants. The supplied K&N Filter successfully filter's out harmful contaminants with it's unique layered design. K&N Air Filters are made up of layers of specially treated cotton gauze that are sandwiched between two epoxy-coated aluminum wire screens for durability. K&N uses a specially formulated grade of oil to treat the cotton gauze layers which causes a tackiness throughout the cotton’s microscopic strands creating a powerful filtering media that ensures engine protection.

    Washable, Reusable Filter. K&N designed their high flow air filters to be reusable. That means there is no need to buy a new filter every few thousand miles, you can just clean the filter, re-oil it, and save money with a K&N Filter Recharge Kit.

    Straight Forward Installation. The K&N Series 63 Aircharger Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.

    Application. This K&N Series 63 Aircharger Cold Air Intake kit is specially designed to fit the 2007 to 2009 GT Mustang's equipped with the 4.6L V8 engine. No computer retuning required.

    Technical Note. This K&N Cold Air Intake is not legal for use in California or other states adopting California emission standards.

    Note: Coupon codes cannot be applied to this product.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) Hose Clamp #72
    • (1) Hose; 2”ID x 6.13”ID Oval
    • (1) Hose; 3/8”ID x 17”L
    • (1) Intake Tube (EW)
    • (1) Adaptor; Nylon 6/6 GF, Black
    • (1) Hose Clamp #52
    • (1) Saddle Bracket
    • (1) Bolt; 6mm-1.00 x 20mm, F/H/A
    • (1) Washer, Conical, Black Nylon
    • (1) Bracket
    • (7) Washer; 1/4”ID x 5/8”OD Flat
    • (3) Nut; 6mm Nylock
    • (2) Hose Clamp #56
    • (1) Hose; 3.5”ID x 2”L, Black Silicone
    • (1) Edge Trim 30”
    • (1) Edge Trim 23”
    • (1) Heat Shield
    • (1) Bracket; “L”
    • (2) Bolt; 6mm-1.00 x 16mm, Hex
    • (2) Bolt; 6mm-1.00 x 25mm, Hex
    • (4) Washer; 1/4” Split Lock
    • (1) Bracket “L”
    • (1) Adapter #452
    • (1) Hose Clamp #104
    • (1) Air Filter
    • (2) Screw; m4.7x16mm
    • (1) Wrench; Torx T20
    • (1) Gasket; 3/16 Poron
    • (2) Bolt; M6x1.00x16mm, BH, SS

    Tech Specs

    Cold Air Intake Specifications
    Year/Model:2007-2009 GTFilter Placement:Engine Bay
    Material:High density polyethylene plasticFinish:Black Finish
    Manufacturer:K&NComputer Tune Required:No
    4.7

    Customer Reviews (315)

      Questions & Answers

      10 More Questions

          Related Mustang Categories