FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Top Sellers in Challenger
How to install MMD by FOOSE Side Scoops - Pre-Painted on your 2015-2016 Mustang
Installation Time
30 minutes
Tools Required
- Alcohol Wipes
- Adhesion Promoter
- Inserts
- Tape Kit
Shop Parts in this Guide
1
Wipe the tape ledges on the scoop and paint surface where the scoop will mount with the provided alcohol wipes followed by adhesion promoter. **Note: A clean surface is essential for proper adhesion.
2
Apply the supplied tape as seen above.
3
Remove the tape backing from the insert and install the insert to the side scoop.
4
Fit the part before removing tape backing. The top edge of the scoop sits roughly a 1/4" below the body line.
5
Line up the lower edge of the scoop as seen above. Then remove the tape backing and apply firm pressure to the scoop securing it to the car.
