FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Best Sellers
How To Install an MMD by FOOSE Rear Valance Diffuser on your 2005-2009 Ford Mustang GT
Installation Time
2 hours
Tools Required
- Alcohol Wipes
- Adhesion Promoter
- 11mm Socket and Ratchet
- 2 - Bumper Brackets
- 2 - Lower Brackets
Shop Parts in this Guide
1
Clean bumper and wipe the areas circled with supplied alcohol wipes.
2
**Note the orientation of the mounting tab, they are side specific. This is the left side.
3
Prep the Diffuser with the alcohol wipe and adhesion promoter anywhere that the diffuser tape makes contact to bumper.
4
Press mounting tab to diffuser so that only the tape is visible, otherwise the tab will hold the diffuser off the bumper.
5
Center the diffuser on the bumper and apply firm even pressure on tape surfaces. Following the above sequence.
6
Mount the lower tabs by first removing the 11mm bolt, installing the tab and then press the tab against the diffuser.
