Rethreader Die Set; 10-Piece Set

Economical Way to Restore and Reuse Threaded Components. Invest in a Rethreader Die Set; 10-Piece Set if you’d like to save money reusing old threaded components and hardware. This 10-piece set comes with thread sizes: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, and 1/2-Inch. They come in both course and fine threads. With this rethreader die set, you can clean up old gunky threads or restore damaged threads to their rightful size. This tool set can save you lots of money, especially if you do these kinds of projects often enough.

Made of Steel. The 10-piece Rethreader Die Set is made with heat-treated steel. The heat treatment strengthens and hardens the dies so they can withstand the intense pressure required to re-thread bolts and other components. To differentiate the course from the fine thread set, they come in different finishes—one light and the other, dark. Each die is marked with the correct size so you can identify each one quickly and accurately.

Easy to Use. You would need a vice grip to hold the hardware or component that you need to re-thread. There are a number of creative ways you can do this, depending on the hardware. But the bottom line is that you need the item to be stable enough to run the die. Then, choose the die that corresponds to the hardware or component and use it to chase the threads. You can use a spanner wrench to run the die over the hardware. To make the job easier, use a lubricant.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov