How to Install Pypes Pype-Bomb Axle-Back Exhaust (15-17 GT) on your Ford Mustang

Step 1: Get your car up in the air with a lift or jack and jack stands.

Step 2: Measure twice; cut once. I made two marks. I cut the outside one and did a test fit. I slowly trimmed it back towards the inner mark until the tips lined up in the bumper how I wanted.

Step 3: Using a fresh blade, make your cuts. It’s a good idea to put something under the stock muffler to keep it from dropping after you make your cut. 

Step 4: Test fit your new Pype-Bomb muffler and clamp in place if satisfied with fitment.

Step 5: Repeat process on the opposite side.

Step 6: Make sure your tips are looking good and start the car to check for exhaust leaks.

Note: If you loosened the hanger brackets, make sure you tighten them before you put your car back on the ground.

Installation Guide Created and Submitted by AmericanMuscle customer, James B. – July 1st 2017. Work completed on “Dorothy” his ’16 Mustang GT w/PP.