FREE 1 to 3-Day Delivery on Orders $119+ Details
Best Sellers
Quick Start Guide Raxiom OE-Style GPS Navigation w/ Bluetooth & Back-up Camera 2005-2014 Mustang
*FOR MODELS WITH FORD SYNC® ONLY
--------------------------------------------------------------------------------
NOTICE OF INTENDED USE
Some features of Rosen Electronics LP are not intended for viewing by the driver when the vehicle is in motion, such as movie playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as
much as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or interfere with the driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local laws.
Rosen Electronics LP disclaims any liability for any bodily injury or property damage that might result from any improper or unintended use.
ABOUT THE REGISTERED TRADEMARKS
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
iPod® and iPhone® are registered trademarks of Apple, Inc.
NAVIGATION MAPS
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the time of its release, a map database can never be 100% accurate. Road information that is maintained in the map databases, such as turn restrictions or road names may change over time.
Errors or missing information in the map data are not covered by the Product Warranty. New and/or updates for the map data are the responsibility of the End-user.
NOTE: Features listed in this manual are subject to change without notice.
Copyright © 2012 by Rosen Electronics LP. All rights reserved. Except as permitted under the Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of Rosen Electronics LP.
---------------------------------------------------------------------------------
For complete Owner’s and Navigation Manuals,
please visit
Rosen Electronics LP online at
www.RosenElectronics.com
---------------------------------------------------------------------------------
System Basics
Vehicle ignition must be On or in ACC Mode to operate system.
When the vehicle is turned off, the unit will automatically turn off.
• DISP: Press to dim backlight/ turn display off
• NAV: Enter/Exit Navigation
• MENU: Reference OEM Owners Manual
AUX
• Sync Source: Reference OEM Sync related source
Screen Organization
Your system will automatically default to the last screen you were on prior to turning off the unit.
The Information Bar is located at the
top of the screen. Depending on the
source, it will provide information or content sensitive controls
The Source Tabs located at the bottom of the screen will give you direct access to common sources.
This will take you to the Settings Menu for advanced control settings.
__________________________________________________
FUNCTIONS
Most functions on the Rosen unit are controlled by SYNC or the Factory buttons.
Please refer to your Factory Owner’s Manual for all other instructions.
AM/FM Radio
Touch to change station.
Long Press: To set preset.
Short Press: To go to specific preset.
Note: Factory presets are covered up and not accessible
Satellite Radio (If Equipped)
Touch to change station.
Long Press: To set preset.
Short Press: To go to specific preset.
CD
When you insert a CD in the Rosen unit and access the CD screen, you will be able to see the Track number and time played.
Bluetooth
Your phone will need to be paired by using SYNC. Please refer to the Factory SYNC manual for instructions.
On the Rosen unit, you will be able to dial phone numbers and receive calls. All other Bluetooth functions will be accessed through the Factory Bluetooth.
Note: “PHONE” is highlighted BLUE when a phone is paired to Rosen Bluetooth
Main Settings
Clock: The time displayed on all screens
Beep: Button beep On/Off
Reverse: Turn Auto backup camera On/Off
Illumination: Set to Auto/ON/OFF for the unit button
Style Settings
You can customize the style of your unit with backgrounds
Highlight Color: Change between several highlight colors
Background: Select from several options
Before operating your Rosen Navigation system, please carefully read and
follow the instructions provided in the “Safety Information and Precautions”
located on the inside back cover of this Quick Start Guide.
Entering Navigation
To access navigation, press the NAV button on the unit.
To exit navigation, you will need to press the same NAV button.
Start Up
When the navigation software starts, you will see the reminder warning to use your
navigation software safely and lawfully.
You must accept these conditions to continue
Please refer to the User’s Manual for additional information and warning on proper
use of the Rosen Navigation product.
Understanding the Map
The top part of the screen shows
you what the next street is and which
direction to turn on your route
Select the Quick
Menu to access the
most used functions
These displays show
you the distance, time
left and the estimated
arrival time of your trip
Shows you the street you are currently on
Access the Navigation Menu
Find an address or Point of Interest and access the Favorites and History menu
Displays the route details and allows
you to edit, change or cancel existing route
Displays current position, surrounding map area and route.
Customize the navigation software
Quick Menu
Located in the top right corner of the
map screen is the Quick Menu. In
this screen, there is a selection of
functions that are frequently needed
during navigation.
You can use this option to search for
places of interest along the way of
your route, such as: Gas Stations,
Restaurants, Parking, etc.
Modifying Existing Routes
You can modify an existing route by accessing either the Quick Menu or Main Navigation menu
You can use this option to select
an alternative route to your
destination.
This option is a good way to
change road types and modes.
You can avoid highways, allow
toll roads, etc.
Enter or Find Address
If you are on the Map screen, press MENU. In the Navigation Menu, select Find Address.
Note: By default, the software proposes the country and state where you are currently
located.
1. Touch “City Name” and the keyboard screen will appear.
2. Your current city will automatically
default. To search for a different city,
start typing each letter of the City
name
Tap to confirm city
3. A “Select City” screen will appear.
This will show a list of cities that
match your selection. Touch the city
you desire.
4. Select “Street” and the keyboard
screen will appear.
5. Start typing each letter of the street name.
6. A Street Name list will appear. Select the one you are looking for.
7. Repeat these steps for House number, or if you do not know it, you can select the SELECT STREET option.
8. A map will appear.
Click Next and a short summary of the route will flash on the screen for a few seconds.
9. After the summary, the map appears showing the entire route.
Tap to start your journey.
Setting Favorites
You can set Favorite destinations (like Home, etc) so you do not have to enter it manually each time.
-Once you have entered all information and press DONE, in the next screen, you will select MORE
-Select ADD TO FAVORITES
-It will take you to keyboard where you can rename your favorite. (Example: HOME)
-Select DONE and you Favorite is now saved.
You can also set a Favorite from the History section. Please see below.
Route History
You can search through the History menu to access past routes or to set a past route as a Favorite.
-From the QUICK MENU or SETTINGS in the main menu, select HISTORY
- To set as a Route, select the address, then tap SELECT.
-To set as a Favorite, select the address, then tap MORE. Select ADD TO FAVORITES.
Adjusting the Time Zone
To adjust the time displayed on the unit, please use the steps below.
1. Press MENU in the bottom left
corner of the screen
2. Select SETTINGS
---->REGIONAL
---->Time Zone
3. Now you are in the clock setting screen.
-Use can set the time zone to change automatically when entering a new time zone.
-Use the minus and plus icons to adjust the time in increments of 15 min
-Set Daylight Savings OFF/ON
Map Settings
You can modify and customize the way your maps are displayed by accessing the Map Settings
From the map screen select the
Quick Menu button.
Select Map Settings from the list
Map Setting Options
View Mode: Set as 3D or 2D
Viewpoint: Low, Med or High
Automatic Overview: ON/OFF
Colors: Day, Night or Auto
Day Map Color: Select from several themes
Night Map Color: Select from several themes
3D Vehicle Gallery: Select from several vehicles/people that will be displayed as your marker
Landmarks: ON/OFF
Buildings: ON/OFF
Track Logs: ON/OFF
Place Markers: Select what markers (such as gas, food, etc) that you would like the map to automatically display
Safety Information and Precautions
WARNING! Please read and follow the following safety precautions.
Failure to follow the instructions below may increase your risk of collision and personal injury.
The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never supersede any local traffic regulation or your personal judgment and /or knowledge of safe driving practices. Prior to completing any maneuvers suggested by your Rosen Navigation software (for example, a U-turn or a left turn), verify that you can legally and safely complete the maneuver. Do not follow route suggestions if they direct you to perform an unsafe or illegal maneuver, would place you in an unsafe situation, or would route you into an area that you consider unsafe.
Do not use the Rosen Navigation software to locate emergency services (such as police, fire stations, hospitals, and clinics). The database may not include all emergency service providers. Use your own best judgment and ask for directions in these situations.
If the vehicle is in motion, only a passenger should program the Rosen Navigation software. The driver should not program the system unless the vehicle is parked in a safe location.
The Rosen Navigation software’s map database provides information on suggested routes without regard to factors that may affect your driving experience or the time required to arrive at your destination. For example, the system does not reflect road detours, closures or construction, some road characteristics (e.g., road surface, slope or grade, weight or height restrictions, etc.), temporary traffic congestion, weather conditions, and similar factors.
Vehicle Position
The Rosen Navigation software’s computer considers vehicle speed and heading changes, together with longitude and latitude information, to accurately determine vehicle heading and position on a digital map.
Map and Information Database
The map database used by your Rosen Navigation software was created using high-resolution aerial and land based data collection.
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the time of its release, a map database can never be 100% accurate. Road information that is maintained in the map databases, such as turn
restrictions or road names may change over time.
Errors or missing information in the map data are not covered by the Product Warranty. New and/or updates for the map data are the responsibility of the End-user.
End-User License Agreement
Please refer to the Rosen Navigation User’s Manual to review and accept the terms and conditions in the End-User License
before operating this product.
