How to Install Raxiom Profile LED Tail Lights - Red Lens (15-18 All) on your Ford Mustang

Step 1: Remove the (4) screw on fasteners holding the trunk panel in place. Then apply slight upward pressure to remove the panel from trunk.

Step 2: Using a panel removal tool or pliers, remove the plastic clip holding the trunk liner in place. Fold back the liner to access the tail light fasteners.

Step 3: Remove the (3) nuts securing the tail light to the vehicle. Unclip the tail light plug and remove the light from the vehicle.

Step 4: Remove the upper plastic trim panel from the factory tail light. Use a plastic trim removal tool and gently pry upward.

Step 5: Transfer the trim panel to the replacement tail light.

Step 6: Install the tail light in the reverse order.