How to Install Roush Cold Air Kit on a 2015-2017 Mustang V6

There should be eight pieces inside. They are:

(1) Roush Air Box

(2) Dirty Air Inlet

(3) Filter Tube

(4) Air Filter

(5) Bulb Seal and Bolts

(6) Clean Air Tube

1. Pop the hood and prop it open. 2. Locate the air box cover. Unlatch two clips circled in red, and then loosen the adjustable steel clamp circled in blue. Remove the air box cover.

3. With the cover removed, remove the air filter and then the 10mm bolt holding the filter housing in place. You will need this bolt to install the Roush Intake. It is circled in red in the picture below.

4. With the bolt removed, the stock air box can be removed altogether. Lift upwards as you shimmy and wiggle the box to loosen it. This is what the air box looks like after it is removed: