Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
Best Sellers
How to Install Modern Billet Chrome Brake Fluid Cap Cover on your Mustang
Shop Parts in this Guide
- SpeedForm Modern Billet Brake Fluid Cap Cover; Chrome (05-14 Mustang, Excluding 13-14 GT500)
- SpeedForm Modern Billet Power Steering Cap; Chrome (05-10 Mustang)
- SpeedForm Modern Billet Radiator Cap Cover; Chrome (05-10 Mustang)
- SpeedForm Modern Billet Washer Fluid Cap; Chrome (05-09 Mustang)
- SpeedForm Modern Billet Underhood Dress-up Kit; Chrome; 6-Piece Kit (05-09 Mustang GT)
Oil Cap Installation: Remove the factory oil cap by turning it counter-clockwise. Then Install the Modern Billet Chrome Oil Cap.
Windshield Reservoir / Power Steering Cap: Remove the factory reservoir cap. Wrap the cable tether around the reservoir opening then press the cap onto the reservoir.
Brake Fluid Reservoir Cap: Using the supplied alcohol wipe, clean the reservoir cap. Ensure the cap it tight. Test Fit the Modern Billet cap. Loosen the set Allen screw(s). Remove the double sided tape backing, place the cap over the reservoir and tighten the set screw(s).
Radiator Cap Cover: Using the supplied alcohol wipe, clean the reservoir cap. Ensure the cap it tight. Test Fit the Modern Billet cap. Loosen the set Allen screw(s). Remove the double sided tape backing, place the cap over the reservoir and tighten the set screw(s).
Remove the dipstick from the vehicle. Using an appropriate sized punch or drill bit, tap out the factory roll pin.
Remove the dipstick from the factory handle and slide it into the Modern Billet Chrome handle.
Re-install the factory roll pin in the Modern Billet handle.
