Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Best Sellers
How To Install An SR Performace Black Strut Tower Brace On Your 2005-2010 Mustang GT
Installation Time
30 minutes
Tools Required
- 3/8 Ratchet
- 3/8 Torque Wrench
- 13 mm Socket
Shop Parts in this Guide
Installation Instructions:
1. Remove the inner nuts of the strut tower mounts for both the right and left side
2. Once you remove all four nuts, put the strut tower brace in place, over the strut mount studs, assuring the angled brackets sit flush over the strut mounts (Note: If the brace is not sitting flush and angled over the mount, then the brace is sitting backwards)
3. Screw the nuts back over the brace’s bracket; assure they are snug as you will be torqueing them down. Using the torque wrench, torque the screws to 26 ft/lb
4. Enjoy!
Installation Instructions written by AmericanMuscle Customer Daniel Garcia 11.02.2014 ​
