How to Install Vividline Clear LED Rear Side Markers (15-19 All) on your Ford Mustang

Installation Instructions:

• Start by looking under the rear bumper up to the backside of the marker light and unplug the light from the harness.

• Now reach towards the front of the car on the marker light and push the tab backwards to release the light.

• On the outside of the bumper, gently pull the front of the marker light out and then slide it forward to remove from bumper.
• Once unplugged, untwist the socket from the housing and plug it into the new marker light.
• Place marker light back in by sliding the rear in first and then clicking the front back in.
• Go back under the bumper and plug the new marker light in.
• Repeat for the other side of vehicle.

Installation Instructions Written by Bradley Davidson 07/10/2019