Xtreme Stop Precision Cross-Drilled and Slotted Brake Rotor and Carbon Graphite Pad Kit; Rear (05-10 Mustang)Find parts that fit my vehicle

Boost Your Mustang's Braking Performance. No matter how hard you push your 2005-2010 Mustang on the road or racetrack you'll stay free of brake fade and other problems with the premium quality Xtreme Stop Precision Cross-Drilled & Slotted Rear Rotor with Carbon Graphite Brake Pad Kit. Hot gases are blown out through the rotor's precision drilled holes to keep fade at a minimum via excellent cooling, while the milled slots refresh the pad surface and make the brakes operate well even when drenched during the heaviest downpour. The brilliant zinc electroplated surface and drilled/slotted detail also make these rotors look good when they're gleaming out from behind a stylishly designed wheel.

Superior Rotor Construction. XtremeStop CNC machines their one-piece Brake Rotors from premium cast iron with drilled holes and milled slots to maintain a perfect balance. XtremeStop's precision hole and slot design provides a reduction in operation temperatures up to 200 degrees when compared to standard OE rotors. XtremeStop then completes their Precision Rotors in a bright zinc electroplating treatment to provide good looks and protection against rust.

Cross-Drilled and Slotted. Xtreme Stop's Precision Rotors feature a cross-drilled and slotted design that reduces heat and brake fade by allowing brake dust, water and gasses to escape through the vented holes. The slotted design will keep the surface of your brake pads cleaner, which will give you an improvement in braking performance while providing maximum grip and quiet stopping power.

Cooling Vane Design. Unlike other brake rotors that are a solid design, XtremeStop's Precision Rotors feature a vented vane design with an internal chamber structure. These vanes allow the hot gasses to escape easier to further enhance the cooling performance of your brakes. Quicker heat dissipation in turn increases your Mustang's braking performance.

Carbon Graphite Compound. XtremeStop Brake Pads are engineered and manufactured in North America. These Brake Pads are made from a carbon graphite semi-metallic compound using a positive mold manufacturing process for consistent quality. Using 10 times less resin content than low cost and OEM pads, XtremeStop Pads are post cured (heat treated) to ensure superior density for better braking performance and longer pad life. XtremeStop's Carbon Graphite Brake Pads will last up to 30,000 miles under normal driving conditions. 

Minimal Dust and Noise. Featuring a design similar to OE pads and a unique rotor friendly carbon graphite semi-metallic compound these XtremeStop Brake Pads produce significantly less dust than the original factory pads. Quieter than stock, XtremeStop Brake Pads utilize rubber coated shims to help minimize braking noise for almost silent operation.

Direct Fit Replacement Upgrade. Xtreme Stop designed their Precision Cross-Drilled & Slotted Rotor and Carbon Graphite Brake Pad Combo Kit to be a direct fit replacement upgrade for your Mustang's stock rotors and pads. Installation can normally be completed in under three hours with just basic hand tools using the existing calipers and hardware.

Complete Rear Kit. This Xtreme Stop Precision Rotor and Carbon Graphite Brake Pad Kit comes complete and includes (2) 11.8" Rear Rotors and Rear Brake Pads. The Kit also includes all the required hardware needed for installation on your Mustangs original factory calipers.

Application. This Rear Xtreme Stop Precision Cross-Drilled and Slotted Rotor with Carbon Graphite Brake Pad Combo Kit is made to fit all 2005 to 2010 Mustangs, including the V6, GT, Bullitt and Shelby GT500 models.

Fitment:

• 2005 Ford Mustang
• 2006 Ford Mustang
• 2007 Ford Mustang
• 2008 Ford Mustang
• 2009 Ford Mustang
• 2010 Ford Mustang

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov